two-component(Part A and B ) neutral silicone sealant for curtain wall /facade
190 L part A and 19 L part B
two parts,neutral cure,especial use as a secondary sealant in a dual-seal insulating glass ,
weather- proof,can use outside, can be cure without moisture,suit for manufacture glazing work,easy
to use (good quality)
Product introduction,
· Off-acetic acid type, one-component, high modulus, and easy to use.
· Strong bonding for most building materials.
· High adhesive strength, fast curing.
· Performance water-resistance.
Long using life, do not turning yellow and black.
Outstanding weather resistance, free from rain, snow, ozone, extreme temperature and long-lasting UV.
Adapt to ± 25% of the interface displacement, and can recover from the expansion/contraction, suitable for glass structure installation.
Application:
· For the professional engineering.
· Adhesive seal for the large glass structure.
· Water-weathering seal for the various types of glass doors and windows.
· Caulking and adhesive seal for many materials.
· Adhesive seal for glass fish tanks, aquariums and so on.
· Point-wall adhesion and weather seals.
· Other multi-purpose.
| Performance |
Index |
| Sagging Degree(mm) |
≤1mm |
| Extrusion Performance(s) |
≤10s |
| Surface Drying Time(min) |
≤60min |
| Stretching Binding Strength(Mpa) |
≤0.6Mpa |
| Displacement Capacity(%) |
±25% |
| Hardness HsA |
30-55 |
How to use:
· Using acetone or other solvents to clean the material's surface.
· Pasting low viscosity tape on the place needed to be protected.
· Before the glue has not been cured, trim and remove the tape.
Restriction:
· No construction on the wet surface.
· No used on the oil or oil leakage surface.
Note:
· Stored dry at room temperature.
· Can not be used directly in the new cement concrete surface.
· If contact eyes, using plenty of water or take medical treatment at once.
· Large difference in temperature/humidity, the volume of the product ± 9ml are normal.
Discription for use:
Ensure all the surface to be sealed are clean, dry and grease-free.
Cut off the tip of the small threaded protrusion on top of the tube. Screw the pointed nozzle to the remaining.
Apply sealant with caulking gun. The sealant will form a layer on the surface in aproximatele 10 minutes at 25ºCand will be dry to touch in 1 hour. It will be fully cured in 24-48 hours depending on the surfaces to be sealed.
Warining:
Ensure good ventilation when used indoors. Avoid direct contact with skin. If exposed to eyes, flush with water and consult with a physician immediately. Keep out of reach of children.
Do not use for structural glazing applications.
Storage:
Packing: 300ml
Colour: Clear White Black Bronze Grey
Storage: Temperature should not exceed 30 degree for prolonged periods.
Caution: Use within 9 months.
Some key words about our company:
1, Established in 1996, mainly deals in the decorating and building materials wity our brand"Glorystar".
2, Owns "Glorystar Enviornmental Building Material Reaearch Center" and "Glorystar's Industrial Estate. "
3, Certificate: ISO9001: 2000, OHSAS18001: 1999, China enviornmental product authentication, The standard of producing construction silicone sealant in 2005.
4, Production Capability: More than 6 million PCS/cartridge per month.
5, With more than 20 sole agents and many flagship shops in the world.
6, Monthly export more than 50 containers.
7, Exported to more than 50 countries and regions.
8, Interior and Exterior Exhibition Fair
9, Service Concept: To serve by heart, to commit prfessionly
10, Perfect sale service and perfect market logistic system.
Audited Supplier 
){kind=link}