Lapis, Marble, Masonry, Neutral Cure Silicone Sealant for Concrete Filling
|FOB Price:||US $1.15 / Piece|
|Min. Order:||6,000 Pieces|
|Min. Order||FOB Price|
|6,000 Pieces||US $1.15/ Piece|
|Production Capacity:||20, 722, 677 PCS/Year|
|Payment Terms:||L/C, T/T|
- 9 Products
- Product Image
- Product Name
- FOB Price
- Payment Terms
- Product Package
- Product Table
- Model NO.: N35
- Seal Tape Kind: Liquid Tape
- Material: Composite Materials
- Mildew Proof: Mildew Proof
- Volume: 250-590ml
- Transport Package: 24PCS/Carton; 1900 Cartons/20container
- Origin: Guangzhou
- Type: Silicone Sealant
- Seal Tape Usage: Sealant
- State: Fluid
- Bonding Material: Glass
- Trademark: Glorystar
- Specification: ISO9001: 2000
- HS Code: 3506100010
Glorustar N35 is neutral cure silicone sealant specially for mansory. Sealing for woodwork to mansory work and concrete filling.
Deoximation type, one-component, neutral cure, easy to use.
Non-corrosive and no polluting for the stone, ceramics and cement prefabrication.
Excellent resistance for the UV and aging, and there is no bad effect with the sunshine, rain, snow and extreme temperature.
Good compatibility with all neutral silicone sealant and silicone rubber.
Outstanding adhesion to most building materials.
Main used for the caulk seal for dry hanging stone curtain wall engineering and cement slab works.
Caulk seal for the concrete tunnel and road project stretching.
Various other purposes, such as, automobile, ship-building, packing, and decorating etc.
Applicable to the installation and weathering caulk seal of all kinds of high-grade windows and doors.
For the caulk seal of most materials.
|Sagging Degree(mm)||≤ 3mm|
|Surface Drying Time(min)||≤ 60min|
|Stretching Binding Strength(Mpa)||≥0.4Mpa|
|Maximum Strength Elongation(%)||≥200%|
How to use:
Using a solvent or other means to clean the surface of the material to be bonding.
Pasting low viscosity tape on the parts needed protect.
Triming and removing the tape before the glue has not been vulcanized.
Do not used as a structural adhesion.
Do not construction on the wet surface.
Do not used on the surface of the oil of oil leakage.
Do not apply to the application of structural assembly or for injections of the substrate surface temperature engineering applications of more than 50º C
Long buried interface should not be used.
Directions for use:
Ensure all the surfaces to be sealed are clean, dry and grease-free.
Cut off the tip of the small threaded protrusion on top of the tube. Screw the pointed nozzle to the remianing.
Apply sealant with caulking gun. Tje sealant will form a layer on the surface in approximately 10 minutes at 25 degree and will be dry to touch in 1 hour. It will be fully cured in 24-48 hours depending on the surface to be sealed.
Ensure good ventilation when used indoors. Avoid direct contact with skin. If exposed to eyes, flush with water and consult with a physician immediately. Keep out of reach of children.
Do not use for structural glazing applications.
Colour: Clear White Black Bronze Grey
Storage: Temperature should not exceed 30 degree for prolonged periods.
Caution: Use within 9 months.